RT info:eu-repo/semantics/article
T1 Two-phase modelling and simulation of the hydrothermal fractionation of holm oak in a packed bed reactor with hot pressurized water
A1 Cabeza Sánchez, Álvaro
A1 Sobrón Grañón, Francisco
A1 Yedro, Florencia Micaela
A1 García Serna, Juan
AB Hydrothermal fractionation has been thoroughly studied in order to develop a sustainable process to recover the sugars and/or the biopolymers contained in biomass. However, a physico-chemical model which considers the main involved physical phenomena, like porosity variations, has not been fully developed yet. Thus, the objective of this work was to approach a more realistic model than other yet published, incorporating also a novel reaction pathway for biomass fractionation. It establishes that cellulose and hemicellulose begin their fractionation in the solid, breaking in water-soluble oligomers and sugar. Besides, deacetylation reactions and insoluble oligomer formation from cellulose were considered. Kinetics followed the Arrhenius׳ law and and it has been demonstrated that an autocatalytic kinetic model can be successfully used to simulate the biomass breaking in soluble oligomers. The process was carried out in a tubular reactor charged with 5 g of holm oak and continuously fed with hot pressurized water. To assess the mass transfer between the solid and liquid, 4 volumetric flows (5 mL/min, 10 mL/min, 20 mL/min and 40 mL/min) and two particle diameters (3 mm and 6 mm) were used. In the same way, temperature was set between 175 °C and 207 °C. The latter was the main variable due to its effect in biomass solubility and kinetics. The model was solved by the Runge-Kutta׳s method with 8th order of convergence and its discretization was performed by a new modification of the orthogonal collocation method on finite elements. It was validated by fitting total organic carbon (TOC) with Absolute Average Deviation (A.A.D. between 16.3% and 55.8%), acetic acid concentration (A.A.D. between 44.4% and 84.4%) and pH profiles (A.A.D. between 5.6% and 9.7%). Besides, the mass transfer between the solid and the liquid was checked and the deviations of the simulation were lower than 8.5%.
PB Elsevier
YR 2015
FD 2015
LK http://uvadoc.uva.es/handle/10324/21921
UL http://uvadoc.uva.es/handle/10324/21921
LA eng
NO Chemical Engineering Science, Volume 138, 22 December 2015, Pages 59-70
NO Producción Científica
DS UVaDOC
RD 24-abr-2024