Por favor, use este identificador para citar o enlazar este ítem:http://uvadoc.uva.es/handle/10324/14135
Título
Estudio de un separador líquido-vapor para concentrar una corriente con nanopartículas a escala de laboratorio
Autor
Director o Tutor
Año del Documento
2015
Titulación
Grado en Ingeniería Química
Abstract
In this project, a flash drum is going to be studied as a method to concentrate a
stream with nanoparticles continuously at bench scale. Several aspects are going to be
analysed, such as the removal of water produced in the flash, the dragging of product
that is carried by the vapour and the hydrodynamic size of the nanoparticles.
The nanoparticles were synthesized by a hydrothermal method at high pressure
in a counter-current nozzle reactor, patented by the University of Nottingham [1].
Afterward, the pressure was released and the stream was concentrated using a flash
drum and separating the vapour from the liquid.
Several designs of the flash drum have been tested, for example providing the
rig with more insulation or adding a band heater, obtaining better results in the
separation of the liquid and vapour.
In some cases, the amount of solids carried by the vapour was measured as
well in order to know the amount of product that is not possible to recover.
Materias (normalizadas)
Nanopartículas
Ingeniería Química
Departamento
Otro
Idioma
eng
Derechos
openAccess
Aparece en las colecciones
- Trabajos Fin de Grado UVa [28700]
Files in questo item
![Attribution-NonCommercial-NoDerivatives 4.0 International](/themes/Mirage2//images/creativecommons/cc-by-nc-nd.png)