2026-04-26T20:26:49Zhttps://uvadoc.uva.es/oai/request

oai:uvadoc.uva.es:10324/512942022-02-08T09:42:49Zcom_10324_1166com_10324_931com_10324_894col_10324_1338

Basterra Otero, Luis Alfonso Balmori Roiz, José Antonio Morillas, Leandro Acuña Rello, Luis Casado Sanz, María Milagrosa 2022-01-12T17:18:16Z 2022-01-12T17:18:16Z 2017 Construction and Building Materials, 2017, vol. 154. p. 914-920 0950-0618 https://uvadoc.uva.es/handle/10324/51294 10.1016/j.conbuildmat.2017.08.007 The purpose of this work is to study the flexural behaviour of Populus euroamericana I-214 low-grade glulam timber beams, internally reinforced with Glass Fibre Reinforced Polymer (GFRP). To this end, 30 unreinforced beams and 60 reinforced beams, with two ratios of GRFP reinforcement, were produced and tested. Results show an improvement in the flexural behaviour of reinforced beams, with noticeable increases in stiffness (MOE) and ultimate moment capacity (MOR). By using relatively low reinforcement ratios (1.07%, 1.6%) in the tension zone, we have measured an average improvement of 12.1% and 14.7% in stiffness, and an increase up to 23% in moment capacity. GFRP reinforced seems to reduce the influence of timber heterogeneity and singularities (knots, cracks . . .), which translates into less scattered results and better characteristic values. Ministerio de Ciencia e Innovación (project BIA2012-31233) Junta de Castilla y León (project VA051A10-2) application/pdf eng Elsevier info:eu-repo/semantics/restrictedAccess © 2017 Elsevier Timber Madera Internal reinforcement of laminated duo beams of low-grade timber with GFRP sheets info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion https://www.sciencedirect.com/science/article/pii/S0950061817315982?via%3Dihub SI