RT info:eu-repo/semantics/bachelorThesis
T1 Robot UR5 guiado por visión artificial
A1 Horno Pérez, Pablo
A2 Universidad de Valladolid. Escuela de Ingenierías Industriales
A2 HAMKValkeakoski, Finland.HAMK University of Applied Science
K1 Robótica
K1 Robots
K1 Inteligencia artificial
AB The aim of this project is to use a collaborative robot arm with six articulation points and a wide scope of flexibility, to feed a conveyor belt. These collaborative robot arms are designed to mimic the range of motion of a human arm and can be used with safety in the range of human workspace.The main problem of this project is that the robot doesn´t know at any moment of the program the sizes, position nor orientation of the pieces it had to take. It will be accomplished with the help of a vision system which will guide the robot to locate and pick up the pieces from the pickup zone, and then place they in the beginning of the conveyor belt, but the conveyor belt and the base of the robot may not be always with the same offset, so the robot have to have a reference point of the conveyor belt to transforms and interpolate all the waypoints of the trajectories used to leave the piece on it.To accomplish this objective, an URCap will be used, the Wirst camera from Robotiq which need a vision server running in the controller with the licence key in a USB and to keep the collaborative attribute of the robot, a collaborative gripper will be used in which can be set the force, velocity of the opening and closing operations.As a conclusion the Wrist Camera, can detect really fast any thought object, and also dropped pieces and orientates them in the correct way, so the robot can pick them up.Communications between PLC and robot works in real-time and the robot tries to keep the PLC always busy.
YR 2018
FD 2018
LK http://uvadoc.uva.es/handle/10324/32318
UL http://uvadoc.uva.es/handle/10324/32318
LA eng
NO Departamento de Química Analítica
DS UVaDOC
RD 04-dic-2024