RT info:eu-repo/semantics/article
T1 Density and viscosity measurements of (piperazine + water) and (piperazine + 2-dimethylaminoethanol + water) at high pressures
A1 Concepción Rodríguez, Eduardo Iván
A1 Moreau Ortega, Alejandro
A1 Martín González, María del Carmen
A1 Bermejo Roda, Maria Dolores
A1 Segovia Puras, José Juan
K1 Termodinámica
K1 Viscosity
K1 Density
K1 High pressure
K1 Piperazine
K1 2-Dimethylaminoethanol
K1 3322.02 Generación de Energía
AB The purpose of this paper is broadening the understanding of amine solution behaviour through the experimental measurements of density (up to 140 MPa) and viscosity (up to 100 MPa) in a temperature range from (293.15 to 393.15) K. The two selected blends are Piperazine (PZ) + Water (10% amine weight concentration) and Piperazine (PZ) + 2-Dimethylaminoethanol (DMAE) + Water (10% and 30% amine weight concentration, respectively). Densities were measured using a vibrating tube densimeter (Anton Paar DMA HPM) with an expanded uncertainty (k = 2) less than 0.7 kg·m-3. Viscosities were obtained using a falling body viscometer which was calibrated with water and dodecane. The viscosity expanded uncertainty (k = 2) ranges from 2.5% for the highest viscosity to 3.2% for the lowest one. Experimental data were fitted to modified Tamman-Tait equation for densities and modified VFT model for viscosities, obtaining good results for both equations.
PB Elsevier
SN 0021-9614
YR 2020
FD 2020
LK http://uvadoc.uva.es/handle/10324/39000
UL http://uvadoc.uva.es/handle/10324/39000
LA eng
NO Journal of Chemical Thermodynamics 2020, 105960
NO Producción Científica
DS UVaDOC
RD 18-nov-2024