RT info:eu-repo/semantics/article
T1 Combining coagulation, softening and flocculation to dispose reverse osmosis retentates
A1 Ordóñez Sanz, Ruth
A1 Moral, Ana
A1 Hermosilla Redondo, María Daphne
A1 Blanco Suárez, Ángeles
K1 Reverse osmosis
K1 Aguas residuales - Depuración y tratamiento
K1 Water - Softening
K1 Papel - Industria
K1 Ingeniería química
K1 Química industrial
K1 Coagulation
K1 Flocculation
K1 Refractory organic matter
AB The concentrated stream of a reverse osmosis unit was treated by coagulation, softening and flocculation to reduce conductivity and refractory organic matter content. Different polyaluminium chlorides and one ferric salt were used as coagulants, lime was added as softener, and two polymers (anionic and cationic polyacrylamides) were tested as flocculants. Coagulants reduced significantly the presence of refractory compounds by themselves, although conductivity increased. Lime addition decreased conductivity forming precipitates of CaCO3 and Mg(OH)2. When coagulation was combined with flocculation without adding lime, the anionic flocculant was more effective than the cationic one because the specific high hardness of water supplied enough Ca2+ and Mg2+ to promote the formation of bigger flocs, bridging the slightly negative coagula and anionic groups of the polymer; although they also reduced the efficiency of the cationic polyacrylamide. None of the tested flocculants showed any effect on conductivity and refractory organic matter reduction when lime was added.
PB Elsevier
SN 1226-086X
YR 2012
FD 2012
LK https://uvadoc.uva.es/handle/10324/57696
UL https://uvadoc.uva.es/handle/10324/57696
LA eng
NO Journal of Industrial and Engineering Chemistry, Vol. 18, Nº. 3, 2012, págs. 926-933
NO Producción Científica
DS UVaDOC
RD 17-jul-2024