Methodology for measuring the thermal conductivity of insulating samples with small dimensions by heat flow meter technique

Abstract

Nowadays, developing advanced, highly insulating materials for minimizing heat losses in buildings is of utmost relevance. Thus, there is a constant research activity focused on developing new and enhanced solutions for thermal insulation. However, characterizing the behavior of new thermal insulation materials, usually produced at lab-scale with small dimensions, by a steady-state approach is a challenge. The reason is that commercial heat fow meters require large samples (hundred on mm side) to provide accurate results of thermal conductivity because they are based on international standards. In this work, a new methodology to measure the thermal conductivity of small prototypes of thermal insulating materials (as low as 50×50 mm2 ) is developed by using an external heat fow sensor placed into a standard heat fow meter apparatus. Four diferent thermal insulators were used to validate the developed methodology by performing measurements in the heat fow meter with and without the external sensor. From these results, a calibration curve that relates both methods was calculated. Furthermore, the efect of the sample size was studied to explore the limits of the technique. Results show that the self-developed method is an accurate procedure to determine the thermal conductivity of samples with small dimensions via a steady-state condition.