A low abatement efficiency for the hydrophobic fraction of odorous emissions and a high footprint are often pointed out as the major drawbacks of conventional biotechnologies for odor treatment. In this work, two conventional biotechnologies (a compost-based biofilter, BF, and a biotrickling filter, BTF), and a hollow-fiber membrane bioreactor (HF-MBR) were comparatively evaluated in terms of odor abatement potential and pressure drop (ΔP) at empty bed residence times (EBRTs) ranging from 4 to 84 s, during the treatment of methyl-mercaptan, toluene, alpha-pinene and hexane at trace level concentrations (0.75–4.9 mg m−3). High removal efficiencies (RE > 90% regardless of the air pollutant) were recorded in the BF at EBRTs ≥ 8 s, although the high ΔP across the packed bed limited its cost-effective operation to EBRTs > 19 s. A complete methyl-mercaptan, toluene and alpha-pinene removal was recorded in the BTF at EBRTs ≥ 4 s and ΔP lower than 33 mmH2O (∼611 Pa mbed−1), whereas slightly lower REs were observed for hexane (∼88%). The HF-MBR completely removed methyl-mercaptan and toluene at all EBRTs tested, but exhibited an unstable alpha-pinene removal performance as a result of biomass accumulation and a low hexane abatement efficiency. Thus, a periodical membrane-cleaning procedure was required to ensure a steady abatement performance. Finally, a high bacterial diversity was observed in the three bioreactors in spite of the low carbon source spectrum present in the air emission.
