Navegação DEP32 - Artículos de revista por autor "Martín de León, Judit"

Analysis of the foaming window for thermoplastic polyurethane with different hard segment contents

Santiago Calvo, Mercerdes; Naji, Haneen; Bernardo García, Victoria

; Martín de León, Judit

; Saiani, Alberto; Villafañe González, Fernando

; Rodríguez Pérez, Miguel Ángel

(2021)

Anisotropy in nanocellular polymers promoted by the addition of needle‐like sepiolites

Bernardo García, Victoria

; Martín de León, Judit

; Rodríguez Pérez, Miguel Ángel

(2019)

Cold neutron transmission for the in-situ analysis of the gas diffusion in polymers

Martín de León, Judit

; Cimavilla Román, Paula

; Bernardo García, Victoria

; Solorzano Quijano, Eusebio

; Kardjilov, Nikolai; Rodríguez Pérez, Miguel Ángel

(2021)

Cyclic gas dissolution foaming as an approach for simultaneously reducing cell size and relative density in nanocellular PMMA

Martín de León, Judit

; Bernardo García, Victoria

; Rodríguez Pérez, Miguel Ángel

(2021)

Easy-way production of highly transparent nanocellular polymers films

Martín de León, Judit

; Jiménez, M.; Pura Ruiz, José Luis

; Bernardo García, Victoria

; Rodríguez Pérez, Miguel Ángel

(2021)

Evaluation of methods to accurately characterize the thermal conductivity of micro-and nanocellular polymers based on poly(methyl-methacrylate) (PMMA) produced at lab-scale

Sánchez Calderon, Ismael

; Sillero, Ángel; Lizalde Arroyo, Félix

; Bernardo García, Victoria

; Martín de León, Judit

; Rodríguez Pérez, Miguel Ángel

(2022)

Highly anisotropic nanocellular polymers based on tri-phasic blends of PMMA with two nucleating agents

Bernardo García, Victoria

; Martín de León, Judit

; Rodríguez Pérez, Miguel Ángel

(2019)

Key Production Parameters to Obtain Transparent Nanocellular PMMA

Martín de León, Judit

; Bernardo García, Victoria

; Rodríguez Pérez, Miguel Ángel

(2017)

Low density nanocellular polymers based on PMMA produced by gas dissolution foaming: Fabrication and cellular structure characterization

Martín de León, Judit

; Bernardo García, Victoria

; Rodríguez Pérez, Miguel Ángel

(2016)

Low-density PMMA/MAM nanocellular polymers using low MAM contents: Production and characterization

Bernardo García, Victoria

; Martín de León, Judit

; Pinto Sanz, Javier

; Catelani, Tiziano; Athanassiou, Athanassia; Rodríguez Pérez, Miguel Ángel

(2019)

Mechanical Properties of PMMA‐Sepiolite Nanocellular Materials with a Bimodal Cellular Structure

Bernardo García, Victoria

; Loock, Frederik; Martín de León, Judit

; Fleck, Norman A.; Rodríguez Pérez, Miguel Ángel

(2019)

Micronization as a solution for enhancing the thermal insulation of nanocellular poly(methyl-methacrylate) (PMMA)

Sánchez Calderon, Ismael

; Bernardo García, Victoria

; Cuadra Rodríguez, Daniel

; Martín de León, Judit

; Rodríguez Pérez, Miguel Ángel

(2022)

Modeling the heat transfer by conduction of nanocellular polymers with bimodal cellular structures

Bernardo García, Victoria

; Martín de León, Judit

; Pinto Sanz, Javier

; Verdejo, Raquel; Rodríguez Pérez, Miguel Ángel

(2019)

Nanocellular Polymers with a Gradient Cellular Structure Based on Poly(methyl methacrylate)/Thermoplastic Polyurethane Blends Produced by Gas Dissolution Foaming

Bernardo García, Victoria

; Martín de León, Judit

; Sánchez Calderon, Ismael

; Laguna Gutiérrez, Ester; Rodríguez Pérez, Miguel Ángel

(2019)

Nanocellular polymers: The challenge of creating cells in the nanoscale

Martín de León, Judit

; Bernardo García, Victoria

; Rodríguez Pérez, Miguel Ángel

(2019)

New non-destructive optical approach to determine the crystallization kinetics of PLA under a CO2 atmosphere with spatial and temporal resolution

Martín de León, Judit

; Bernardo García, Victoria

; Solorzano Quijano, Eusebio

; Rodríguez Pérez, Miguel Ángel

(2021)

Novel approach based on autoclave bead foaming to produce expanded polycarbonate (EPC) bead foams with microcellular structure and controlled crystallinity

Sánchez Calderon, Ismael

; Bernardo García, Victoria

; Martín de León, Judit

; Rodríguez Pérez, Miguel Ángel

(2021)

Overcoming the Challenge of Producing Large and Flat Nanocellular Polymers: A Study with PMMA

Martín de León, Judit

; Bernardo García, Victoria

; Cimavilla Román, Paula

; Pérez Tamarit, Saul

; Rodríguez Pérez, Miguel Ángel

(2019)

PMMA-sepiolite nanocomposites as new promising materials for the production of nanocellular polymers

Bernardo García, Victoria

; Martín de León, Judit

; Laguna Gutiérrez, Ester; Rodríguez Pérez, Miguel Ángel

(2017)

Production and characterization of nanocellular polyphenylsulfone foams

Martín de León, Judit

; Bernardo García, Victoria

; Rodríguez Pérez, Miguel Ángel

(2016)

Navegação DEP32 - Artículos de revista por autor "Martín de León, Judit"

Analysis of the foaming window for thermoplastic polyurethane with different hard segment contents ﻿

Anisotropy in nanocellular polymers promoted by the addition of needle‐like sepiolites ﻿

Cold neutron transmission for the in-situ analysis of the gas diffusion in polymers ﻿

Cyclic gas dissolution foaming as an approach for simultaneously reducing cell size and relative density in nanocellular PMMA ﻿

Easy-way production of highly transparent nanocellular polymers films ﻿

Evaluation of methods to accurately characterize the thermal conductivity of micro-and nanocellular polymers based on poly(methyl-methacrylate) (PMMA) produced at lab-scale ﻿

Highly anisotropic nanocellular polymers based on tri-phasic blends of PMMA with two nucleating agents ﻿

Key Production Parameters to Obtain Transparent Nanocellular PMMA ﻿

Low density nanocellular polymers based on PMMA produced by gas dissolution foaming: Fabrication and cellular structure characterization ﻿

Low-density PMMA/MAM nanocellular polymers using low MAM contents: Production and characterization ﻿

Mechanical Properties of PMMA‐Sepiolite Nanocellular Materials with a Bimodal Cellular Structure ﻿

Micronization as a solution for enhancing the thermal insulation of nanocellular poly(methyl-methacrylate) (PMMA) ﻿

Modeling the heat transfer by conduction of nanocellular polymers with bimodal cellular structures ﻿

Nanocellular Polymers with a Gradient Cellular Structure Based on Poly(methyl methacrylate)/Thermoplastic Polyurethane Blends Produced by Gas Dissolution Foaming ﻿

Nanocellular polymers: The challenge of creating cells in the nanoscale ﻿

New non-destructive optical approach to determine the crystallization kinetics of PLA under a CO2 atmosphere with spatial and temporal resolution ﻿

Novel approach based on autoclave bead foaming to produce expanded polycarbonate (EPC) bead foams with microcellular structure and controlled crystallinity ﻿

Overcoming the Challenge of Producing Large and Flat Nanocellular Polymers: A Study with PMMA ﻿

PMMA-sepiolite nanocomposites as new promising materials for the production of nanocellular polymers ﻿

Production and characterization of nanocellular polyphenylsulfone foams ﻿

Analysis of the foaming window for thermoplastic polyurethane with different hard segment contents

Anisotropy in nanocellular polymers promoted by the addition of needle‐like sepiolites

Cold neutron transmission for the in-situ analysis of the gas diffusion in polymers

Cyclic gas dissolution foaming as an approach for simultaneously reducing cell size and relative density in nanocellular PMMA

Easy-way production of highly transparent nanocellular polymers films

Evaluation of methods to accurately characterize the thermal conductivity of micro-and nanocellular polymers based on poly(methyl-methacrylate) (PMMA) produced at lab-scale

Highly anisotropic nanocellular polymers based on tri-phasic blends of PMMA with two nucleating agents

Key Production Parameters to Obtain Transparent Nanocellular PMMA

Low density nanocellular polymers based on PMMA produced by gas dissolution foaming: Fabrication and cellular structure characterization

Low-density PMMA/MAM nanocellular polymers using low MAM contents: Production and characterization

Mechanical Properties of PMMA‐Sepiolite Nanocellular Materials with a Bimodal Cellular Structure

Micronization as a solution for enhancing the thermal insulation of nanocellular poly(methyl-methacrylate) (PMMA)

Modeling the heat transfer by conduction of nanocellular polymers with bimodal cellular structures

Nanocellular Polymers with a Gradient Cellular Structure Based on Poly(methyl methacrylate)/Thermoplastic Polyurethane Blends Produced by Gas Dissolution Foaming

Nanocellular polymers: The challenge of creating cells in the nanoscale

New non-destructive optical approach to determine the crystallization kinetics of PLA under a CO2 atmosphere with spatial and temporal resolution

Novel approach based on autoclave bead foaming to produce expanded polycarbonate (EPC) bead foams with microcellular structure and controlled crystallinity

Overcoming the Challenge of Producing Large and Flat Nanocellular Polymers: A Study with PMMA

PMMA-sepiolite nanocomposites as new promising materials for the production of nanocellular polymers

Production and characterization of nanocellular polyphenylsulfone foams