Por favor, use este identificador para citar o enlazar este ítem:https://uvadoc.uva.es/handle/10324/80731
Título
Research on the manufacture and environmental assessment of vibration and structure-borne sound insulation foams from packaging film waste
Autor
Año del Documento
2025
Editorial
Elsevier
Descripción
Producción Científica
Documento Fuente
Construction and Building Materials, 2025, vol. 502, p. 144309
Resumen
This study investigates the manufacture and environmental assessment of acoustic insulation foams made from
recycled polyethylene (RM) from packaging film waste. Blends of RM with virgin polyethylene (PE) and
ethylene-vinyl acetate (EVA) were used to produce cellular structures through chemical (Ch) and physical (Ph)
foaming processes. The aim was to develop materials with properties comparable to commercial acoustic
insulation products in construction sector, assessing structural integrity and acoustic performance via dynamic
stiffness. Products with performance like the commercial were achieved with recycled content ranging from 40 to
80 wt%. These successful cases were also evaluated for environmental impact. The life cycle assessment
considered two approaches: one analysing the production of 1 kg of foam (standardized density values), where
physical foaming showed a lower environmental footprint, and the other evaluating the mass needed to achieve
the dynamic stiffness of the commercial reference (empirical density values), which favoured chemical foaming
for producing foams with comparable properties but lower densities. Although physical foaming has environ-
mental advantages, the higher densities achieved with RM limit its viability. Consequently, chemical foaming is
more environmentally favourable due to lower material consumption. Therefore, Ch_RM:EVA,80:20 is optimal
for technical requirements, while Ch_RM:PE,40:60 is more environmentally advantageous. The compromise
solution that addresses both technical and environmental aspects is Ch_RM:EVA,40:60. This foam showed
acoustic performance equivalent to the commercial, achieved through a manufacturing process and recycled
content minimizing environmental impacts. Furthermore, transforming packaging waste into a long-lasting
product also reduces waste accumulation and delays non-sustainable but necessary processes like energy
generation.
Palabras Clave
Packaging waste
Blends polymer
Recycled polymer
Low-density foams
Acoustic insulation
Life cycle analysis
ISSN
0950-0618
Revisión por pares
SI
Patrocinador
Ministerio de Economía y Competitividad (MINECO) (Proyecto ECOLAYER - TED2021–129419B-C22)
Version del Editor
Propietario de los Derechos
© 2025 The Author(s)
Idioma
eng
Tipo de versión
info:eu-repo/semantics/publishedVersion
Derechos
openAccess
Aparece en las colecciones
Ficheros en el ítem
La licencia del ítem se describe como Atribución-NoComercial 4.0 Internacional










