Skip navigation
Por favor, use este identificador para citar o enlazar este ítem: http://uvadoc.uva.es/handle/10324/21903
Título: Advances in the design of co-poly(ether-imide) membranes for CO2 separations. Influence of aromatic rigidity on crystallinity, phase segregation and gas transport
Autor: Tena, Alberto
Marcos Fernández, Ángel
Viuda, Mónica de la
Palacio Martínez, Laura
Prádanos del Pico, Pedro
Lozano, Ángel E.
Abajo, Javier de
Hernández Giménez, Antonio
Año del Documento: 2015
Editorial: Elsevier
Descripción: Producción Científica
Documento Fuente: European Polymer Journal 2015, vol. 62, p. 130–138
Resumen: In our previous works, it was observed a clear relationship between the structure and the properties for different copoly(ether-imide)s, besides a good relation was found between SAXS characterization and permeability results. Here, a series of aliphatic aromatic copoly( ether-imide)s, based on an aromatic diamine (ODA), a diamine terminated poly(ethylene oxide) (PEO2000) of a molecular weight of 2000 g/mol and different aromatic dianhydrides (BPDA, BKDA (or BTDA) and PMDA) has been synthesized and characterized. The permeability for O2, N2, CO2 and CH4, increased with the rigidity of the monomers (BKDA < BPDA < PMDA), with the amount of PEO2000 in the copolymers, as well as with the increase in the temperature of treatment of the films. In this case, it was observed that when the proportion of PEO in the copolymer exceeded 50%, the permeability was similar for all samples, and the aromatic portion had no significant influence. Attending to glass transition temperature, Tg, of the aliphatic part, to its melting temperature, Tm, and to its crystallinity, segregation was better for more rigid dianhydrides at lower temperatures of treatment. Higher dianhydride rigidity produced better mechanical properties that were good but decreased a little bit when the percentage of PEO in the samples increased. Good permselectivity compromises were attained for the CO2/N2 separation. This work gives indications on how to design advanced materials for this separation with the increasing possibilities of controlled structure and properties.
Materias (normalizadas): Copoly(ether-imide) membrane
Gas separation
ISSN: 0014-3057
Revisión por Pares: SI
DOI: 10.1016/j.eurpolymj.2014.11.016
Patrocinador: Junta de Castilla y León (programa de apoyo a proyectos de investigación – Ref. VA302U13)
Version del Editor: http://www.sciencedirect.com/science/article/pii/S0014305714004017
Idioma: eng
URI: http://uvadoc.uva.es/handle/10324/21903
Derechos: info:eu-repo/semantics/openAccess
Aparece en las colecciones:DEP31 - Artículos de revista

Ficheros en este ítem:
Fichero Descripción TamañoFormato 
PREV-08-Eur-Polym-J-62-130-138-2015.pdf520,2 kBAdobe PDFThumbnail
Visualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons

Comentarios
Universidad de Valladolid
Powered by MIT's. DSpace software, Version 5.5